空间金属增材制造技术应用

刘亦飞; 李亮; 王功; 刘兵山

doi:10.11728/cjss2018.03.380

空间金属增材制造技术应用

doi: 10.11728/cjss2018.03.380

中国科学院空间应用工程与技术中心北京 100094

基金项目:

载人航天领域预先研究项目资助（Y7031021XY）

详细信息

作者简介:
刘亦飞,E-mail:liuyifei@csu.ac.cn

中图分类号: V524
计量
- 文章访问数: 1374
- HTML全文浏览量: 135
- PDF下载量: 636
- 被引次数: 0
出版历程
- 收稿日期: 2017-08-22
- 修回日期: 2018-01-11
- 刊出日期: 2018-05-15

Application of Metal Additive Manufacturing Technology for Space

Technology and Engineering Center for Space Utilization, Chinese Academy of Sciences, Beijing 100094

摘要

摘要: 高能束流金属增材制造技术以激光和电子束作为热源，通过选区熔化粉末或熔丝沉积成型来实现金属零部件的制造.根据金属增材制造技术在空间领域的发展，结合空间站和深空探测强约束条件对在轨制造设备尺寸、重量、功耗、寿命提出的更高要求，对比激光与电子束两种热源的工作模式，进行在轨可行性分析，提出未来空间金属增材制造技术发展所面临的问题与解决途径.
- 激光 /
- 电子束 /
- 熔融沉积 /
- 空间金属增材制造
Abstract: In the high energy beam metal additive manufacturing technology, the laser and electron beam are used as the heating source to realize the manufacture of metal parts by powder melting or fuse deposition modeling. Based on the development of the metal additive manufacturing technology in the field of space, combining with the higher requirements of the on-orbit equipment size, weight, power consumption and life span induced by the strong constraints of space station and deep space exploration, the two working modes of the laser and electron beam heating sources are compared,and the on-orbit feasibility is analyzed. Moreover, the problems as well as the solutions to the development of future space metal additive manufacturing technology are presented.
- Laser /
- Electron beam /
- Fused deposition modeling /
- Space metal additive manufacturing

HTML全文

参考文献(11)

[1]	GLAESSGEN E H, SCHOEPPNER A. Materials[J]. Aerospace Am., 2006, 12:76-77
[2]	HAFLEY R A, TAMINGER K M B, BIRD R. K. Electron beam freeform fabrication in the space environment[C]//45th AIAA Aerospace Sciences Meeting and Exhibit. Reno, Nevada:AIAA, 2007
[3]	MULANI S B, LI JING, JOSHI P, et al. Optimization of stiffened Electron Beam Freeform Fabrication (EBF3) panels using response surface approaches[C]//48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. United states, 2007
[4]	HUANG Weidong. The research progress of 3D printing materials[J]. New Industr., 2016, 6(3):53-70(黄卫东. 材料3D打印技术的研究进展[J]. 新型工业化, 2016, 6(3):53-70)
[5]	LIU Yaxiong, HE Jiankang, LIAN Fen. Xi'an Jiao Tong University the personalized medical implants material manufacturing and application[C]//The 15th National Special Processing Academic Meeting. Nanjing:the Chinese Mechanical Engineering Society. 2013:245-248(刘亚雄, 贺健康, 连芬, 等. 西安交大个性化医用内置物的增材制造及应用[C]//第15届全国特种加工学术会议. 南京:中国机械工程学会, 2013:245-248)
[6]	LU Bingheng. Research progress of advanced manufacturing technology in Xi'an Jiaotong University[J]. Eng. Sci., 2013(1):4-8(卢秉恒. 西安交通大学先进制造技术研究进展[J]. 中国工程科学, 2013(1):4-8)
[7]	YAN Zhangong, LIN Feng, QI Haibo, YAN Yongnian. Design of and research on powder manipulating device of electron beam selective sintering system[J]. Manuf. Technol. Machine Tool, 2005(11):26-29(闰占功, 林峰, 齐海波, 等. 电子束选区烧结系统粉末操纵装置设计研究[J]. 制造技术与机床, 2005(11):26-29)
[8]	QI Haibo, LIN Feng, YAN Yongnian. The application of electron beam in the field of rapid manufacturing[J]. New Technol. New Skill, 2004(11):54-56(齐海波, 林峰, 颜永年, 等. 电子束在快速制造领域的应用[J]. 新技术新工艺, 2004(11):54-56)
[9]	YANG Xin, XI Zhengping, LIU Yong. The research of the TiAl alloy electron beam rapid molding[J]. Rare Metal Eng., 2012, 40(12):2252-2256(杨鑫, 奚正平, 刘咏, 等. TiAl基合金电子束快速成形研究进展[J]. 稀有金属材料与工程, 2012, 40(12):2252-2256)
[10]	JIA Wenpeng, TANG Huiping, HE Weiwei. The electron beam rapid prototyping research progress and the analysis of key issues[J]. Electr. Proc. Molds, 2010(2):41-44(贾文鹏, 汤慧萍, 贺卫卫, 等. 电子束快速成形研究进展及关键问题分析[J].电加工与模具, 2010(2):41-44)
[11]	LIAO Zhiqiu. Beijing nonferrous metal research institute to design and manufacture of high power electron beam melting furnace[C]//National Source of Charged Particle Beam Academic Meeting, 2006:129-132