Citation: | JIANG Hongxiang, SUN Qian, ZHAO Jiuzhou, YANG Zhizeng. Microstructure Evolution of Directionally Solidified Al-3.4%Bi Alloy[J]. Chinese Journal of Space Science, 2016, 36(4): 450-454. doi: 10.11728/cjss2016.04.450 |
[1] |
RATKE L, DIEFENBACH S. Liquid immiscible alloys[J]. Mater. Sci. Eng., 1995, 15:263-347
|
[2] |
RUDRAKSHI G B, OJHA S N. Spray forming and wear characteristics of liquid immiscible alloys[J]. J. Mater. Proc. Technol., 2007, 189(1/2/3):224-230
|
[3] |
PRATT G C. Materials for plain bearings[J]. Int. Met. Rev., 1973, 18:62-88
|
[4] |
TERIZIEFF P, LUCK R. Magnetic investigations in li-quid Al-In[J]. J. Alloys Compd., 2003, 360(1/2):205-209
|
[5] |
WANG C P, LIU X J, OHNUMA I, et al. Formation of immiscible alloy powders with egg-type microstructure[J]. Science, 2002, 297:990-993
|
[6] |
SUN Z B, WANG Y H, GUO J, et al. Liquid and solid phase separation during melt spinning and annealing in melt-spun Cu-Cr ribbons[J]. Mater. Sci. Eng., 2007, 452-453:411-416
|
[7] |
ANDREWS J B, HAYES L J, ARIKAWA Y, CORIELL S R. Microgravity solidification of immiscible alloys[J]. Mat. Res. Soc. Symp. Proc., 1999, 551:255-265
|
[8] |
NEUMANN H, PLEVACHUK Y, ALLENSTEIN F. Investigation of Marangoni convection in monotectic melts by resistance measurements[J]. Mater. Sci. Eng., 2003, 361:155-164
|
[9] |
HUANG Q, LUO X H, LI Y Y. An alloy solidification experiment conducted on Shenzhou spacecraft[J]. Adv. Spa-ce Res., 2005, 36:86-91
|
[10] |
RUDRAKSHI G B, SRIVASTAVA V C, PATHAK J P, OJHA S N. Spray forming of Al-Si-Pb alloys and their wear characteristics[J]. Mater. Sci. Eng., 2004, 383:30-38
|
[11] |
ZHAO J Z. Formation of the minor phase shell on the surface of hypermonotectic alloy powders[J]. Scripta Mater., 2006, 54:247-250
|
[12] |
DAI R R, ZHANG S G, GUO X, LI J G. Formation of core-type microstructure in Al-Bi monotectic alloys[J]. Mater. Lett., 2011, 65:322-325
|
[13] |
JIANG H X, ZHAO J Z. Effect mechanism of a dire-ct current on the solidification of immiscible alloys[J]. Chin. Phys. Lett., 2012, 29:088104
|
[14] |
ZHANG Lin, WANG Engang, ZUO Xiaowei, HE Jicheng. Effect of high magnetic field on solidified structure of Cu-80%Pb hypermonotectic alloy[J]. Acta Metall. Sin., 2008, 44:165-171(张林, 王恩刚, 左小伟, 赫冀成. 强磁场对Cu-80%Pb过偏晶合金凝固组织的影响[J]. 金属学报, 2008, 44:165-171)
|
[15] |
WANG J, ZHONG Y B, WANG C, et al. Physical simulation of homogeneous Zn-Bi monotectic alloy prepared by electric-magnet compound field[J]. Acta Phys. Sin., 2011, 60:076101(王江, 钟云波, 汪超, 等. 电磁复合场制备匀质Zn-Bi偏晶合金的物理模拟[J]. 物理学报, 2011, 60:076101)
|
[16] |
WANG C P, LIU X J, SHI R P, et al. Design and formation mechanism of self-organized core/shell structure composite powder in immiscible liquid system[J]. Appl. Phys. Lett., 2007, 91:141904
|
[17] |
LI H L, ZHAO J Z. Convective effect on the microstructure evolution during a liquid-liquid decomposition[J]. Appl. Phys. Lett., 2008, 92:241902
|
[18] |
YANG Zhizeng, SUN Qian, ZHAO Jiuzhou. Directional solidification of monotectic composition Al-Bi alloy[J]. Acta Metall. Sin., 2014, 50:25-31(杨志增, 孙倩, 赵九洲. Al-Bi偏晶点成分合金定向凝固过程研究[J]. 金属学报, 2014, 50:25-31)
|